prikaz prve stranice dokumenta RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA NA OSNOVI REVERZIBILNOG INŽENJERINGA
Access restricted to students and staff of home institution
master's thesis
RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA NA OSNOVI REVERZIBILNOG INŽENJERINGA
2019. urn:nbn:hr:153:336433
Milašinović, Matej
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Milašinović, M. (2019). RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA NA OSNOVI REVERZIBILNOG INŽENJERINGA (Master's thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:336433

Milašinović, Matej. "RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA NA OSNOVI REVERZIBILNOG INŽENJERINGA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:336433

Milašinović, Matej. "RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA NA OSNOVI REVERZIBILNOG INŽENJERINGA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:336433

Milašinović, M. (2019). 'RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA NA OSNOVI REVERZIBILNOG INŽENJERINGA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 September 2020, https://urn.nsk.hr/urn:nbn:hr:153:336433

Milašinović M. RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA NA OSNOVI REVERZIBILNOG INŽENJERINGA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2020 September 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:336433

M. Milašinović, "RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA NA OSNOVI REVERZIBILNOG INŽENJERINGA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:336433

Islandora Bookmark - Please login to use this feature
Metadata
TitleRAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA NA OSNOVI REVERZIBILNOG INŽENJERINGA
Title (english)COMPUTER AIDED PROCESS PLANNING BASED ON REVERSIBLE ENGINEERING
AuthorMatej Milašinović
MentorIlija Svalina (mentor)
Committee memberIlija Svalina (član povjerenstva)
Committee memberGoran Šimunović (predsjednik povjerenstva)
Committee memberTomislav Šarić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema diplomskog rada je izrada tehnološkog procesa na osnovu reverzibilnog inženjeringa. U teorijskom dijelu opisan je reverzibilni inženjering, računalom podržano konstruiranje, računalom podržana proizvodnja, te alati koji su se koristili za skeniranje predmeta. Nakon opisivanja reverzibilnog inženjeringa pristupilo se izradi modela u Autodesk Invetoru. Drugi način na koji se dolazi do modela je korištenjem 3D skenera Artec Eva, te pripadajućeg softwarea Artec Studio 9. Nakon dobivanja modela na jedan od ova dva načina pristupilo se izradi tehnološkog procesa. Izrađena je tehnološka dokumentacija i tehnička dokumentacija. Za izradu tehnološkog procesa korišten je programski paket Siemens NX. Na kraju dobiveni G-kod učitava se u program WinNC u kojemu je prikazana simulacija rada za upravljačku jedinicu Sinumerik 810d/840D.
Abstract (english)
The topic of graduate thesis is the development of a technological process based on reversible engineering. Theoretical part describes reversible engineering, computer aided design, computer aided manufacturing and tools used to scan objects. After describing reversible engineering, modeling in Autodesk Invetor was started. Another way to come up with the model is using the 3D scanner Artec Eva and the associated software Artec Studio 9 After obtaining the model in one of these two ways, the technological process has begun. Technical documentation and technical documentation were produced. The Siemens NX program package was used to create the technological process. Finally, the resulting G-code is inserted into the WinNC program, which shows the simulation of the operation for the Sinumerik 810d / 840D control unit.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:336433
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-26 10:38:44