prikaz prve stranice dokumenta PRORAČUN ČVRSTOĆE HORIZONTALNOG SPREMNIKA ZA SKLADIŠTENJE NAFTNIH DERIVATA
Access restricted to students and staff of home institution
master's thesis
PRORAČUN ČVRSTOĆE HORIZONTALNOG SPREMNIKA ZA SKLADIŠTENJE NAFTNIH DERIVATA
2016. urn:nbn:hr:153:151259
Pudić, Matej
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Pudić, M. (2016). PRORAČUN ČVRSTOĆE HORIZONTALNOG SPREMNIKA ZA SKLADIŠTENJE NAFTNIH DERIVATA (Master's thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:151259

Pudić, Matej. "PRORAČUN ČVRSTOĆE HORIZONTALNOG SPREMNIKA ZA SKLADIŠTENJE NAFTNIH DERIVATA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:151259

Pudić, Matej. "PRORAČUN ČVRSTOĆE HORIZONTALNOG SPREMNIKA ZA SKLADIŠTENJE NAFTNIH DERIVATA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:151259

Pudić, M. (2016). 'PRORAČUN ČVRSTOĆE HORIZONTALNOG SPREMNIKA ZA SKLADIŠTENJE NAFTNIH DERIVATA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 21 September 2020, https://urn.nsk.hr/urn:nbn:hr:153:151259

Pudić M. PRORAČUN ČVRSTOĆE HORIZONTALNOG SPREMNIKA ZA SKLADIŠTENJE NAFTNIH DERIVATA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2020 September 21] Available at: https://urn.nsk.hr/urn:nbn:hr:153:151259

M. Pudić, "PRORAČUN ČVRSTOĆE HORIZONTALNOG SPREMNIKA ZA SKLADIŠTENJE NAFTNIH DERIVATA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:151259

Islandora Bookmark - Please login to use this feature
Metadata
TitlePRORAČUN ČVRSTOĆE HORIZONTALNOG SPREMNIKA ZA SKLADIŠTENJE NAFTNIH DERIVATA
Title (english)CALCULATION OF STRENGTH OF HORIZONTAL TANK FOR STORAGE OF OIL DERIVATES
AuthorMatej Pudić
MentorPejo Konjatić (mentor)
Committee memberPejo Konjatić (član povjerenstva)
Committee memberŽeljko Ivandić (predsjednik povjerenstva)
Committee memberMirko Karakašić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Diplomski rad prikazuje proračun čvrstoće horizontalnog spremnika za skladištenje naftnih derivata. Takvi spremnici se izrađuju po točno određenim normama ili malo izmijenjeni po zahtjevima kupaca. Prije samog proračuna čvrstoće spremnika opisane su norme spremnika, dani su izrazi za proračun svakog dijela spremnika te su opisane metode numeričke analize. U diplomskom radu opisane su metode koje će se koristit za dobivanje rješenja metodom konačnih elemenata. Za numeričku analizu korišteni su ljuskasti (shell) elementi i 3D konačni elementi. Nakon dobivenih rezultata cijelog spremnika u ljuskastim elementima i 3D konačnim elementima provedeno je i podmodeliranje kako bi dobili točnije rezultate na kritičnim mjestima spremnika. U konačnici je provedena analiza rezultata, gdje su uspoređeni rezultati dobiveni analitički s rezultatima dobiveni numerički, te usporedba rezultata dobivenih različitim numeričkim metodama.
Abstract (english)
This thesis shows strength calculation of horizontal tank for storaging oil derivates. Those kind of tanks are made at exact standards or slitghly alltered by customers demands. Before the strength calculations of tanks, the tank standards are described, phrases for calculation of every part of tank have been given, and numerical analysis are described. In the thesis, we have also described the methods which will be used in giving solutions by finite element method. Shell elements and 3D final elements have been used for numerical analysis. After getting the results of full tank in shell elements and 3D final elements, we have used the technique of submodelling to achieve more accurate results in critical points of the tank. In the final aspect, we have conducted result analysis, where we confirmed the results given through analytical, with the results given through numerical methods.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:151259
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-07-15 10:17:22